清潔、晾乾並放心存放

如何安全清潔情趣用品

首先了解玩具的材質、防水等級及製造商的使用說明。接著,使用正確的方法清潔、晾乾並妥善收納,避免不必要的損害。

  • Material-aware advice
  • Waterproofing checked first
  • No one-method-fits-all claims

The quick answer

A safe default is to clean a reusable toy before first use and after each use, following the instructions for that exact product. Never immerse electronics unless the product is rated for it, and let every surface and opening dry fully before storage.

Start here

Three checks decide the cleaning method

The material name is useful, but the construction and manufacturer instructions can change what is safe.

01

Identify the material

Silicone, ABS, glass, metal and soft elastomers have different heat, cleaner and storage needs. If the listing is vague, ask before cleaning.

02

Check the water rating

Fully waterproof, splash-resistant and non-waterproof are not interchangeable. Keep ports and battery compartments protected as instructed.

The reliable routine

Clean, rinse, dry and store

Use the product-specific method below, then complete all four steps before putting the toy away.

01 Switch off and separate

Unplug the toy. Remove batteries, caps or sleeves only when the manufacturer instructs you to do so.

02 Clean the used surfaces

Use the approved cleaner or mild cleanser and water only when permitted. Pay attention to texture, rims and seams.

03 Remove residue

Rinse or wipe as instructed until cleaner and lubricant residue are gone. Avoid flooding openings or contacts.

04 Dry before storage

Pat dry, then air dry fully. Store clean products separately when the brand or material guidance recommends it.

Choose by product type

Material-specific cleaning guide

These are cautious starting points. The exact product manual always overrides general material advice.

Product or material Cleaning approach Drying and storage Avoid
矽膠 請遵循產品手冊。許多矽膠產品允許使用溫水搭配無香味的溫和肥皂或相容的玩具清潔劑清洗,但產品的結構和防水性能仍然很重要。 用布輕輕擦乾並完全風乾。請按照製造商指示保持充電接點和開口處乾燥。 除非製造商明確批准該方法適用於特定產品,否則請勿煮沸、使用洗碗機、漂白劑或酒精。
ABS 和 PC 硬塑料 使用製造商允許的相容溫和清潔劑擦拭或清洗表面。注意接縫、按鈕和電池槽。 在更換蓋子、電池或儲存蓋之前,請徹底擦乾表面和接縫。 請勿煮沸。除非產品標示可完全浸入,否則請勿將有馬達或電池的產品浸入水中。
TPE、TPR、SEBS 和 TPU 將配方視為品牌專用。請使用製造商批准的方法和產品,輕柔且及時地清潔。 完全風乾後分開存放。某些配方可能需要品牌認可的更新粉末。 請勿煮沸或使用強力清潔劑。不要以為一種彈性體的保養需求與另一種相同。
按摩棒、套套與逼真觸感材質 僅在設計可拆卸袖套時才拆除。根據品牌指示清潔內外部,僅使用核准的清潔劑。 將內部管道和外表面完全擦乾。僅在需要時,使用品牌推薦的更新粉末。 除非製造商允許,請勿使用普通肥皂、酒精、熱源或一般粉末。請勿在潮濕狀態下存放。
親密使用玻璃與產品級金屬 使用溫和的肥皂和溫水,或在允許時使用經批准的清潔劑。清潔前後請檢查整個產品。 完全晾乾並在存放時避免碰撞或刮傷。 停止使用有缺口或裂痕的玻璃及損壞的表面處理。避免突然的極端溫度變化及未經批准的加熱方式。
電子、氣脈衝及混合材質產品 僅在指示時分別清潔可拆卸部件。根據其確切的防水等級擦拭或沖洗主體。 在充電或存放前,請將接縫、噴嘴、端口和接觸點周圍擦乾。只有在完全乾燥後才重新裝配零件。 請勿將防濺水或非防水裝置浸入水中。請勿誤以為防水等同於可煮沸或適合長時間浸泡。

矽膠

Cleaning approach

請遵循產品手冊。許多矽膠產品允許使用溫水搭配無香味的溫和肥皂或相容的玩具清潔劑清洗,但產品的結構和防水性能仍然很重要。

Drying and storage

用布輕輕擦乾並完全風乾。請按照製造商指示保持充電接點和開口處乾燥。

Avoid

除非製造商明確批准該方法適用於特定產品,否則請勿煮沸、使用洗碗機、漂白劑或酒精。

ABS 和 PC 硬塑料

Cleaning approach

使用製造商允許的相容溫和清潔劑擦拭或清洗表面。注意接縫、按鈕和電池槽。

Drying and storage

在更換蓋子、電池或儲存蓋之前,請徹底擦乾表面和接縫。

Avoid

請勿煮沸。除非產品標示可完全浸入,否則請勿將有馬達或電池的產品浸入水中。

TPE、TPR、SEBS 和 TPU

Cleaning approach

將配方視為品牌專用。請使用製造商批准的方法和產品,輕柔且及時地清潔。

Drying and storage

完全風乾後分開存放。某些配方可能需要品牌認可的更新粉末。

Avoid

請勿煮沸或使用強力清潔劑。不要以為一種彈性體的保養需求與另一種相同。

按摩棒、套套與逼真觸感材質

Cleaning approach

僅在設計可拆卸袖套時才拆除。根據品牌指示清潔內外部,僅使用核准的清潔劑。

Drying and storage

將內部管道和外表面完全擦乾。僅在需要時,使用品牌推薦的更新粉末。

Avoid

除非製造商允許,請勿使用普通肥皂、酒精、熱源或一般粉末。請勿在潮濕狀態下存放。

親密使用玻璃與產品級金屬

Cleaning approach

使用溫和的肥皂和溫水,或在允許時使用經批准的清潔劑。清潔前後請檢查整個產品。

Drying and storage

完全晾乾並在存放時避免碰撞或刮傷。

Avoid

停止使用有缺口或裂痕的玻璃及損壞的表面處理。避免突然的極端溫度變化及未經批准的加熱方式。

電子、氣脈衝及混合材質產品

Cleaning approach

僅在指示時分別清潔可拆卸部件。根據其確切的防水等級擦拭或沖洗主體。

Drying and storage

在充電或存放前,請將接縫、噴嘴、端口和接觸點周圍擦乾。只有在完全乾燥後才重新裝配零件。

Avoid

請勿將防濺水或非防水裝置浸入水中。請勿誤以為防水等同於可煮沸或適合長時間浸泡。

Important: Do not assume a toy is safe to boil, place in a dishwasher, soak, bleach or wipe with alcohol. Use any of these methods only when the manufacturer explicitly approves it for that exact product.

Pause before the next use

Three signs that need attention

Surface damage

Sticky, cracked, chipped or peeling

Stop using the product. A damaged surface can be harder to clean and may no longer be suitable for intimate use.

Water protection

Loose seal or damaged charging area

Do not immerse it. Check the manual and contact the retailer or manufacturer before cleaning or charging again.

Unclear instructions

Unknown material or cleaner compatibility

Do not guess with heat or household disinfectants. Use the product listing, manual or support team to confirm the method.

Complete the care setup

Cleaners, lubricant and material guidance

Use the next page that answers your question without sending you back to the full catalogue.

Compatibility

Choose Your Lube

Match lubricant to body use, condoms and the material of the product you plan to use.

Material questions

Sex Toy Materials Guide

Compare silicone, TPE, TPR, ABS, glass, metal and realistic-feel materials.

Cleaning questions

Frequently asked questions

我應該多久清潔一次情趣用品?

可重複使用玩具的安全預設清潔時間為首次使用前及每次使用後。請遵循產品的具體說明,特別是電子產品、可拆卸套筒及特殊材質。

我可以用肥皂清潔所有的情趣用品嗎?

不行。許多產品允許使用溫和無香皂,但某些專有的套筒和逼真觸感材質需要不同的護理方式。請查看製造商的說明,並徹底沖洗掉允許使用的清潔劑殘留物。

我可以用水煮矽膠性玩具嗎?

只有在製造商明確批准對該非機動產品進行煮沸的情況下才可進行。外層是矽膠並不代表整個產品能耐高溫,防水也不代表可以煮沸。

我該如何清潔防水震動器?

請查閱手冊以了解允許的深度、使用時間及清潔方法。關閉電源,確保所有蓋子已固定,並依照指示進行清潔。充電或存放前,請將產品及充電區域完全擦乾。

每種玩具清潔劑都適用於所有材質嗎?

不行。請同時檢查清潔劑標籤和玩具製造商的護理指引。某些清潔劑可能適用於多種材質,但並非通用,且除非特別批准,否則不應使用較強的家用消毒劑。

我應該如何清潔自慰器或可拆卸套?

請依照品牌指示移除、沖洗並晾乾套筒。清潔內部通道和外表面,讓兩者完全乾燥,並在需要時僅使用該材質推薦的更新粉末。

清潔過的情趣用品應該如何晾乾和保存?

用布輕輕擦乾,然後自然風乾,直到每個表面、開口和可拆卸部件完全乾燥。存放於乾淨、涼爽的地方,且當製造商或材質指引建議時,請將產品分開保存。

Keep care simple

Check the product, then choose the cleaner

Material and waterproofing determine the method. If the listing or manual is unclear, ask before using heat, immersion or a strong cleaner.